AMI Residential RO Membranes produce high quality water and are designed for use in Home RO Systems. These elements are constructed of DOW RO Flat Sheet, are NSF/ANSI Standard 58 listed and are made in the USA in our ISO 9001:2008 Certified manufacturing plant.
- 100% Quality Check and Integrity Tested
- Fits all Standard 2"x12" Home RO Membrane Housings
- High Quality RO Membranes with Consistent Performance
- Large Stock for Quick Delivery
- Made in the USA using DOW RO Flat Sheet Membrane
Applied Membranes is a major supplier of RO membranes which are sold under the AMI brand. Since 1983, Applied Membranes has manufactured hundreds of thousands of RO Membranes; these elements have earned the reputation of consistent quality, reliability and performance.
This element can be used as replacements in Home RO Systems, and is a direct substitution for the below models:
- Kent RO 100 TFC
- Kent RO 120 Hi-S
- Kent RO 200 Hi-F
- Osmotik T112-100
- RO UltraTec TF-1812-100
Operating Conditions:
Performance specifications based on 500 ppm tap water, 50psi (0.35 MPa) applied pressure, 77°F (25°C) feed water temperature, feed water pH 7-8 and 15% recovery. Element permeate flow may vary ± 15%.
Maximum operation pressure: 125 psi (0.86 MPa)
Maximum feed flow rate: 2 gpm
Maximum operating temperature: 113° F (45° C)
Maximum feed water turbidity: 1 NTU
Maximum feed water SDI (15min): 5
Chlorine tolerance: 0
Feedwater pH range: 2-11
Minimum brine flow to permeate flow ratio: 4:1
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.
DO NOT USE on Watts Premier WP systems.
This is review of "Non-Watts Premier Brand RO Membranes" like this one. While it should work as described, DO NOT USE on Watts Premier WP systems (i.e. WP-4V, WP-4, WP-5). The WP systems are the one-piece manifold systems from Watts Premier.
This does not have the built-in Check Valve or Brine Seal inside the white plastic tube of the RO Membrane. Without this Check Valve or Brine Seal, water from the reservoir tank (when full) will back flow to the RO membrane and damage it, and waste water.
This back flow or reverse flow will happen when your reservoir tank gets full. So basically, you will be wasting water as the water trickle will not stop. When I tested it, water continued to trickle out of the reject water outlet tube even when my reservoir tank is full already (it should stop when reserve tank is full). The water coming out is at a much slower rate though, but still plenty enough to raise your water bill since the water trickle will continue 24 hours a day.
Click here to read the full review for more information about this product.
Product Features :
- 100 Gallons Per Day (16 Liters per Hour) Capacity; AMI Model M-T1812A100
- 98% Stabilized Salt Rejection (Minimum Rejection 96%)
- NSF/ANSI Standard 58 listed
- Fits standard 2" ID Residential Housings (Membrane Dimensions: 1.8"Dia. x 11.75"L)
- Made In USA at Applied Membranes, Inc. - an ISO 9001:2008 Certified Company
Rating : 3.0 out of 5.0
List Price : $26.99
No comments:
Post a Comment